Kia Optima Hybrid: Body Electrical System
Replacement Rear Seat Belt Replacement • When installing the belt, make sure not to damage the retractor. 1. Remove the following items first. • Rear seat assembly (Refer to the BD group ...
Safety Precaution Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: 6.9 ~ 7.9? [20°C(68°F)] Removal 1. Turn the ignition switch OFF and disconnect the battery negative ...
Inspection TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If the problem is found, repair it. Specification: Below 1? 2. Test TCM Connector: Disconnect the TCM connector ...
Rear Seat Belt Repair procedures
General Safety Information and CautionOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Transaxle Control Module (TCM) Repair procedures