Removal |
1. |
Remove the shift lever knob.
(Refer to the BD group - "Console") |
2. |
Remove the console upper cover (A). |
3. |
Disconnect the connector from the console upper cover. |
4. |
Remove the multimedia jack (B) from the console under cover after releasing the fixed hooks (A). |
Installation |
1. |
Install the multimedia jack. |
2. |
Connect the multimedia jack connector. |
3. |
Install the console upper cover. |
4. |
Install the shift lever knob.
|
Description The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3, iPod and etc., through the vehicle''s sound system when it ...
...
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the nut and then remove the rear stabilizer link (B) from the rear lower arm (A). ...
Fail-Safe Mode ItemFail-SafeETC MotorThrottle valve stuck at 5°TPSTPS 1 faultReplace it with TPS 2TPS 2 faultReplace it with TPS 1TPS 1,2 faultThrottle valve stuck at 5°APSAPS 1 faultReplace it with APS 2APS 2 faultReplace it with APS 1APS 1,2 faultThrottle valve stuck at 5° When throttle ...