Kia Optima Hybrid: AVN System / Specifications
| Specifications |
| Item | Specification |
| Power source | DC 14.4V (-) ground |
| Frequency range / Channel space | FM : 87.5 ~ 107.9 MHz / 200 KHz AM : 530 ~ 1710 KHz / 10 KHz |
| Tuning type | PLL SYNTHESIZED TUNING |
| Impedance | 2 ohm x 4 |
| Antenna | 80 pF 75 Ohm |
| Dark current | MAX 3mA (Head unit only) |
| S/N | FM : MIN 50 dB AM : MIN 40 dB |
| Item | Specification | |
| Input power (W or V) | Front | MAX 50W |
| Rear | MAX 50W | |
| Midrange | MAX 50W | |
| Sub woofer | 16 V rms | |
| Center | MAX 50W | |
| Impedance (?) | Front | 2.0 ± 0.3 |
| Rear | 2.0 ± 0.3 | |
| Midrange | 1.9 ± 0.3 | |
| Sub woofer | 4.8 ± 1.0 | |
| Center | 2.0 ± 0.3 | |
| Number of speaker | 8 | |
AVN System
...
Components and Components Location
Components Location 1. AVN (A/V & Navigation head unit)2. Midrange speaker3. External amplifier4. Roof antenna (GPS + SDARS)5. Front door speaker6. Rear speaker7. Woofer speaker8. Antenna feeder cable9. ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Upper Arm Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle. ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Seat Heater Switch Repair procedures
Inspection Front Seat Heater Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover. (Refer to the BD group - "Console") 3. Remove the seat heater switch connectors from the floor console upper cover (A). 4. Operate each seat heater switch and check that continuity ...