Kia Optima Hybrid: Body Electrical System / BCM (Body Control Module)
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn''t flicker. Standard ...
Specifications ItemsSpecificationsRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F~176°F(-30°C~ 80°C)Dark currentBCM & Receiver : 5.5mABCM : 4mA ...
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. Measure resistance between the HO2S terminals 3 and 4 [B1/S2]. 4. Check that the resistance is within the specification. HO2S [Bank 1/Sensor 1] (Linear type) ...
Transmitter Repair procedures
Body Control Module (BCM) SpecificationsOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Accelerator Position Sensor (APS) Description and Operation
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures