Repair proceduresInspection Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal. The horn should make a sound. If the horn fails to make a sound, replace it. Horn Relay Inspection 1. ...
SpecificationsSpecifications AVN head unit ItemSpecificationPower sourceDC 14.4V (-) groundFrequency range / Channel spaceFM : 87.5 ~ 107.9 MHz / 200 KHzAM : 530 ~ 1710 KHz / 10 KHzTuning typePLL SYNTHESIZED TUNINGImpedance2 ...
Removal EPB Unit 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Disconnect the EPB control unit connecter (A). 3. Remove the EPB control unit mounting nuts (B) and the EPB control unit. Tighten torque: 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) EPB Switch 1. Turn ignition ...
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the license lamp (A) after pushing the pins fixed on the both side of license lamp. 3. Remove the bulb (B) by turning it counterclockwise. Installation 1. Install the bulb. 2. Install the license lamp assembly. ...