Calibration Procedure If the compass has been calibrated or set to variance zone number incorrectly, or you are driving in specific places (tunnel, parking lot in building, underground parking lot, near ...
Components 1. Hands free call switch2. Mic3. Front left speaker4. Front right speaker5. Audio head unit (hands free control) ? There is no hands free jack. This system supports Bluetooth(wireless system). ...
Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (C) after disconnecting the heater connector (A) and BSD warning connector (B). 3. Remove the door mirror housing (A) after loosening the mounting screw. Take care not to damage the ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: 19.0 ~ 22.0? [20°C(68°F)] Removal 1. Turn the ignition switch OFF and disconnect the battery ...