Removal |
1. |
Disconnect the negative(-) battery terminal. |
2. |
Remove the front wheel guard. (Refer to the BD group - "Front bumper") |
3. |
Remove the VESS speaker (A) after removing the bolts and connector. |
Installation |
1. |
Install the VESS speaker and connector. |
2. |
Install the front wheel guard. |
Component Location ...
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, rear wheel and tire from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the wheel nuts when removing ...
Inspection 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter. 2. Connect positive (+) battery cables to terminal ...