Kia Optima Hybrid: Blind Spot Detection System / Specifications

Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
30?/h ~ 250?/h
Sensible distance
70m (Sedan)
Curvature radius
Start : More than 100m
Stop : Less than 70m
Frequency
24.125 GHz.
Numbers
2EA : Master(RH) , Slave(LH)

Blind Spot Detection System

...

Components and Components Location

Components 1. BSD unit (RH : Master/ LH : Slave)2. BSD switch3. BSD warning lamp (Built in the outside mirror) ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Balance Shaft & Oil Pump Repair procedures


Removal Balance Shaft Module (BSM) Chain System 1. Remove the timing chain. (Refer to Timing system in this group) 2. Install a stopper pin (A) after compressing the balance shaft chain tensioner. 3. Remove the balance shaft chain hydraulic tensioner (B). 4. Remove the balance shaft chain tensioner arm ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Repair procedures


Inspection When the engine is shut off, the pressure change in the fuel tank by the ambient temperature is monitored by NVLD and when the engine is started, ECM judges whether there is a leak or not through the monitored data. If a leak is detected, ECM displays DTC P0455 or P0456. Process overview If ...

© 2021 Copyright www.koptimatfhev.com