Inspection Driver Door Lock Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") 3. Disconnect the connector from ...
Component Location 1. Power door mirror2. Power door mirror switch3. Power folding mirror switch ...
Component(1) 1. Head lamp assembly lens & housing2. Head lamp (High) lamp3. Dust cap4. Socket5. Turn signal/ Position lamp6. Head lamp (Low) lamp Component(2) 1. Head lamp assembly lens & housing2. Head lamp (High) lamp3. Dust cap4. Socket5. Turn signal/ Position lamp6. Static bending lamp7. ...
Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to the BD group - "Front seat") 3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat. 4. Disconnect the IMS module connector (A). Installation 1. Install the IMS module after reconnecting ...