Description |
Circuit Diagram ...
Removal 1. Remove the shift lever knob. (Refer to the BD group - "Console") 2. Remove the console upper cover (A). 3. Disconnect the connector from the console upper cover. 4. Remove the multimedia jack ...
Inspection 1. Ignition "OFF" 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient temperature sensor between terminals 1 and 2 whether it is changed by changing of the ambient temperature. 1. Sensor Ground2. Ambient Sensor Signal Specification Ambient temperature [°C(°F)]Resistance ...
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Disconnect the canister close valve connector (A). 4. Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve. 5. Remove the fuel tank air filter assembly ...