Circuit Diagram |
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No.Procedure1Locate vehicle to flat plane2Tire check3IGN1 ON4Head ...
Description According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver''s visibility range and to protect the driver''s vision from glare, ...
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp assembly. (Refer to the BD group - "Roof trim") 3. Check for continuity between the terminals. 4. If the continuity is not as specified, replace the panoramaroof switch (A). ...
Front Body A Hood hinge mounting hole (O13)Fender apron upper inner panel tooling hole (O6.6)Front suspension mounting hole (O11)Cowl panel tooling hole (O8)Front pillar cornerFront pillar corner Front Body B Hood hinge mounting hole (O13)Fender apron upper inner panel tooling hole (O6.6)Engine mounting ...