Description |
|
Circuit Diagram ...
Removal [Front Seat] 1. Remove the front seat assembly. (Refer to Body group - "Front Seat") 2. Remove the seat back cover and cushion cover. (Refer to Body group - "Front Seat") 3. Remove the ventilation ...
Inspection With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. A : Power seat control switch B : Lumber support switchRemoval 1. Disconnect the negative (-) battery terminal. 2. Remove ...
Removal and Installation 1. Disconnect the battery negative terminal. Tightening torque : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove the driver airbag module. (Refer to the RT group - "Airbag module") 3. Remove the steering wheel. (Refer to the ST group - "Steering column and shaft") 4. ...