Troubleshooting ProblemPossible causeSolutionNot pairingBluetooth device of Car is not discoverable modeEnter Bluetooth pairing (searching) modeUser’s phone is Bluetooth off modeUser’s phone set Bluetooth ...
Component Location 1. Panoramaroof2. Panoramaroof switch3. Roller blind motor & slave controller4. Panoramaroof motor & controller ...
Removal EPB Unit 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Disconnect the EPB control unit connecter (A). 3. Remove the EPB control unit mounting nuts (B) and the EPB control unit. Tighten torque: 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) EPB Switch 1. Turn ignition ...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper. (Refer to Body - "Front Bumper cover") (Refer to Body - "Rear Bumper cover") 3. Disconnect the connector (A) from the sensor. [Front] [Rear] 4. Pull out the sensor (A) by opening the sensor holder (B) out. [Front] ...