Kia Optima Hybrid: Lighting System / Specifications
| Specification |
| Items | Bulb Type | Bulb Wattage (W) | ||
| Front | Head lamp (STD) | Low | H7S | 55 |
| High | H7L | 55 | ||
| Head lamp (HID) | Low | D1S | 35 | |
| High | H7L | 55 | ||
| Turn signal lamp | PY28/8W | 28 | ||
| Position lamp | PY28/8W or LED | 8 or LED | ||
| Fog lamp | H8L or LED | 35 or LED | ||
| Side marker | LED | LED | ||
| Side repeater lamp | LED | LED | ||
| Rear | Rear combination lmap | Turn signal lamp | P27W | 27 |
| Stop/ Tail lamp (Outside) | LED | LED | ||
| Stop/ Tail lamp (Inside) | LED | LED | ||
| Back up lamp | #921 | 16 | ||
| High mounted stop lamp | LED | LED | ||
| License plate lamp | W5W | 5 | ||
| Map lamp | W10W | 10 | ||
| Room lamp | C10W | 8 | ||
| Luggage lamp | C5W | 5 | ||
| Vanity lamp | C5W | 5 | ||
Lighting System
...
Components and Components Location
Component Location(1) 1. Head lamp (Low)2. Head lamp (High)3. Turn signal lamp (and Posistion lamp)4. Position lamp (LED) and DRL5. Side marker6. Front fog lamp7. Overhead console lamp8. Room lamp9. Vanity ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 3. Remove the rear seat back. (Refer to the Body group - Seat) ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Windshield Wiper-Washer Switch Repair procedures
Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.Wiper Switch Washer Switch Removal 1. Remove the steering column upper and lower shrouds after removing 3 screws. 2. Remove the wiper switch ...