Kia Optima Hybrid: Multifunction switch / Specifications

Specifications
Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-30°C ~ +80°C (-22 ~ +176°F)
Rated load
Dimmer & passing switch
High : 0.2A (Relay load)
Low : 0.2A (Relay load)
Passing : 0.2A (Relay load)
Lighting switch
Lighting : 0.2A (Relay load)
Turn signal & lane change switch
6.6 ± 0.5A (Lamp load)
Fog lamp switch
0.2A (Relay load)
Wiper & mist switch
Low, High : 4.5A (Motor load)
Intermittent : 0.22 ± 0.05A (Relay load)
Lock : Max. 28A (Motor load)
Mist : 4.0A (Motor load)
Washer switch
4A (Motor load)

Multifunction switch

...

Components and Components Location

Component(1) Component(2) 1. Steering column shaft2. Lighting switch3. Wiper and washer switch4. Screw5. Clock spring6. Steering angle sensor ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Upper Arm Repair procedures


Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle. ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rain Sensor Repair procedures


Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switch has been left in automatic mode with the vehicle ignition OFF, and then the vehicle ...

© 2022 Copyright www.koptimatfhev.com