Circuit Diagram |
Operation Function Of Safety Power Window When all door (Front, Rear) power window auto-up switch is operated, safety function is activated. 1. Safety function condition When detect the force of 100N during ...
Inspection Front Power Window Motor Inspection 1. Remove the front door trim panel. (Refer to the BD group - "Front door") 2. Disconnect the connector from the motor. 3. Connect the motor terminals No.2 ...
Component Location 1. Driver power window switch2. Door lock switch3. BCM (Body Control Module)4. Front door lock actuator5. Rear door lock actuator6. Trunk lid open actuator7. SJB (Smart Junction Box) ...
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal • Do not remove the camshaft position sensor while engine is running or right after engine stops, or a scald by the flowed out engine oil may occur. [Bank 1 / Intake] ...