Kia Optima Hybrid: Engine Control/Fuel System

CVVT (Continuously Variable Valve Timing) System Description and Operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Input Speed Sensor Description and Operation


Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM. The sensor provides critical input data that''s used in feedback control, gear setting control, line pressure control, clutch activation pressure ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Stabilizer Bar Repair procedures


Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the nut and then remove the rear stabilizer link (B) from the rear lower arm ...

© 2021 Copyright www.koptimatfhev.com