Kia Optima Hybrid: Engine Control System / Canister Close Valve (CCV) Specifications

Specification
Item
Specification
Coil Resistance (?)
19.8 ~ 21.8 [20°C(68°F)

Canister Close Valve (CCV) Description and Operation

Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system ...

Canister Close Valve (CCV) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Troubleshooting


Troubleshooting SymptomSuspect AreaRemedy (Refer to page)Water leaks from sunroofDeteriorated roof lid weatherstripReplaceExcessive roof lid-to-body clearance and improperly fitted weatherstripAdjustWind noise around sunroofLoose or deformed deflector, gaps in body workRe-tighten adjust or replaceNoise ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures


Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the crankshaft position sensor connector (A). 3. Remove the protector (A). 4. Remove ...

© 2021 Copyright www.koptimatfhev.com