Kia Optima Hybrid: Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification
Pressure (kPa)
Output Voltage (V)
20.0
0.79
46.7
1.84
101.3
4.0

Manifold Absolute Pressure Sensor (MAPS) Description and Operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional ...

Manifold Absolute Pressure Sensor (MAPS) Troubleshooting

Waveform ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: 35R Clutch Control Solenoid Valve (35R/C_VFS) Specifications


Specifications Direct control VFS[35R/C] Control type : Normal high type Control Pressure kpa(kgf/cm?, psi)500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value (mA)50 ~ 850 Internal resistance (?)5.1 ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: IMS (Integrated Memory System) module Repair procedures


Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to the BD group - "Front seat") 3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat. 4. Disconnect the IMS module connector (A). Installation 1. Install the IMS module after reconnecting ...

© 2024 Copyright www.koptimatfhev.com