Kia Optima Hybrid: Engine Control System / Purge Control Solenoid Valve (PCSV) Specifications

Specification
Item
Specification
Coil Resistance (?)
19.0 ~ 22.0 [20°C(68°F)]

Purge Control Solenoid Valve (PCSV) Description and Operation

Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds ...

Purge Control Solenoid Valve (PCSV) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Intake Manifold Repair procedures


Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. Tightening torque: 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Remove the air cleaner assembly. (Refer to Engine and transaxle assembly in this group) 4. Remove the under cover. (Refer to Engine and ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Components and Components Location


Component Location(1) 1. Head lamp (Low)2. Head lamp (High)3. Turn signal lamp (and Posistion lamp)4. Position lamp (LED) and DRL5. Side marker6. Front fog lamp7. Overhead console lamp8. Room lamp9. Vanity lamp10. Turn signal lamp (O/S mirror) Component Location(2) 1. Tail lamp2. Back up lamp3. Stop/Tail ...

© 2021 Copyright www.koptimatfhev.com