Kia Optima Hybrid: Engine Control System / Knock Sensor (KS) Schematic Diagrams
| Circuit Diagram |
Knock Sensor (KS) Specifications
Specification ItemSpecificationCapacitance (pF)850 ~ 1,150 ...
Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Drain the engine coolant (Refer to “Cooling System” in EM group). 3. Remove the radiator upper hose (Refer ...
Other information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Fluid Repair procedures
Inspection ATF level Check When checking the ATF level, be careful not to enter dust, foreign matters, etc. from fill hole. 1. Remove the air duct (A). 2. Remove the eyebolt (A). 3. Add ATF SP-IV 700cc to the ATF injection hole (A). 4. Start the engine. (Don’t step on brake and accelerator ...
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Blind Spot Detection Radar Calibration Description and Operation
Description To sense the cars exactly in the next lane with the radar, the direction of the sensor and the direction of the vehicle have to align. This is BSD unit alignment. If this alignment is not performed as below illustration, the degradation of detection performance and the cause of false alarms. ...