Kia Optima Hybrid: Engine Control System / Knock Sensor (KS) Specifications

Specification
Item
Specification
Capacitance (pF)
850 ~ 1,150

Knock Sensor (KS) Description and Operation

Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When ...

Knock Sensor (KS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Radiator Repair procedures


Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kgf/cm?, 13.51 ~ 17.78psi). 3. Check for a drop in pressure. 4. If the pressure drops, replace the cap. Radiator ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Electric A/C compressor Troubleshooting


Troubleshooting Fault codeFail descriptionRemedy60Compressor CAN signal fault1. Check HV, LV  connector connection. 2. Check LV connector pin condition. 3. Check vehicle inverter fuse condition. 4. A/C ON then check compressor operation. 5. If not operate, replace compressor.61Compressor ...

© 2023 Copyright www.koptimatfhev.com