Kia Optima Hybrid: Engine Control System / Intake Air Temperature Sensor (IATS) Specifications

Specification
Temperature [°C(°F)]
Resistance (k?)
-40(-40)
40.93 ~ 48.35
-20(-4)
13.89 ~ 16.03
0(32)
5.38 ~ 6.09
10(50)
3.48 ~ 3.90
20(68)
2.31 ~ 2.57
40(104)
1.08 ~ 1.21
50(122)
1.56 ~ 1.74
60(140)
0.54 ~ 0.62
80(176)
0.29 ~ 0.34

Intake Air Temperature Sensor (IATS) Description and Operation

Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air temperature ...

Intake Air Temperature Sensor (IATS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Blind Spot Detection Unit Repair procedures


Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery.     Be careful when removing the blind spot detection unit. The bracket may break off from the bumper. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper Cover") 3. Disconnect the BSD connector (A) from the ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Cruise Control Switch Repair procedures


Removal and Installation 1. Disconnect the battery negative terminal. Tightening torque : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove the driver airbag module. (Refer to the RT group - "Airbag module") 3. Remove the steering wheel. (Refer to the ST group - "Steering column and shaft") 4. ...

© 2025 Copyright www.koptimatfhev.com