Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the front wheel guard. (Refer to the BD group - "Front bumper") 3. Remove the VESS speaker (A) after removing the bolts and connector. ...
Safety Precaution Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...
OPU connector and terminal function OPU terminal function [A] PinDescription1Main relay power2Ground3Motor phase power(U)4Motor phase power(V)5Motor phase power(W) [B] PinDescription1Battery power (+)2Battery power (+)3CAN communication line (Low)4OPU status signal5Hall sensor ground6Hall sensor power(+5V)7IG_Key9CAN ...
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, front wheel and tire from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the wheel nuts when ...