Description |
Component Location ...
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficient to be regular value or not. Voltage ...
Replacement 1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). 3. Remove the cushion pipe fixing clip (C), and then separate the head assembly (D). 4. Remove the return nozzle (B) after releasing the ...
Component Location(1) 1. Head lamp (Low)2. Head lamp (High)3. Turn signal lamp (and Posistion lamp)4. Position lamp (LED) and DRL5. Side marker6. Front fog lamp7. Overhead console lamp8. Room lamp9. Vanity lamp10. Turn signal lamp (O/S mirror) Component Location(2) 1. Tail lamp2. Back up lamp3. Stop/Tail ...