Inspection 1. Ignition "OFF". 2. Disconnect the intake actuator connector. 3. Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grounding terminal ...
Components (1) Control Panel (Dual A/C & Heater Controller - A) Connector pin function (1) ConnectorPIN NO.FunctionConnectorPIN NO.FunctionConnector (A)1ILL+(TAIL)Connector (A)29ECV (+)2SENSOR REF ...
Inspection Room Lamp 1. Check that the switch operates properly after disconnecting the room lamp connector (A). [A type] [B type] Removal Room Lamp 1. Disconnect the negative(-) battery terminal. 2. Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. Take ...
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the bolt & nut and then disconnect the shock absorber (A) from the rear axle. ...