Description |
1. |
The function of cluster ion generator is cleaning air by sterilizing and dissolving of air conditioner. |
2. |
The function of cluster ion generator is controlling mold caused by stench of air conditioner and external inflow of air. |
Component Location ...
Inspection 1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. DisplayFail description00Normal50Cluster ion generator fault * Diagnostic procedure refer to DTC code. ...
Replacement Door Trim Replacement • Be careful not to scratch the door trim and other parts. • Put on gloves to protect your hands. 1. After loosening the mounting screws, then remove the rear door trim (A). 2. Disconnect the inside handle cage (A). 3. Disconnect the connector (A). ...
Inspection 1. Remove the trunk room left side trim. (Refer to the BD group - "Interior trim") 2. Remove the fuel filler door release actuator (A) after loosening the mounting bolts. 3. Disconnect the release actuator connector (A). 4. Check for continuity between terminal No.1 and No.2. If there is no ...