Kia Optima Hybrid: Suspension System

Rear Hub - Carrier Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove wheel nuts, rear wheel and tire from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Head Lamps Repair procedures

Inspection 1. Check-points upon head lamp failure (HID) (1) Check the battery voltage. (Low beam will be on when the battery voltage above 9V.) (2) Check the fuse and relay. (3) Check the polarity of ballast. (If the polarity are changed, low beam doesn''t lighten) (4) Check the bulb connector securely. ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Output Speed Sensor Repair procedures

Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure ...