Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft) Be careful not to damage to the hub bolts when removing the front wheel ...
Components Location 1. Sub frame2. Assist arm3. Trailing arm4. Rear disc5. Rear upper arm6. Rear shock absorber7. Coil spring ...
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the crash pad side cover (A). 3. After loosening the mounting screws, then remove the crash pad lower panel (A). 4. Disconnect the crash pad lower switch connectors (A), diagnosis connector (B), crash pad ...
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") 3. Disconnect the panoramaroof motor (A) connector. 4. Ground the terminals as below table, and check that the panoramaroof unit operates. – When inspecting the panoramaroof ...