Kia Optima Hybrid: Suspension System / Front Suspension System
Troubleshooting Vehicle inspection SYMPTOM CHART SymptomSuspect AreaRemedy (See page)Squeak or grunt-noise from the front suspension, occurs more in cold ambient temperatures-more noticeable over rough ...
Components Location 1. Drive shaft2. Lower arm3. Front disk4. Front strut assembly5. Steering gearbox6. Front stabilizer bar7. Sub frame ...
Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to the BD group - "Front seat") 3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat. 4. Disconnect the IMS module connector (A). Installation 1. Install the IMS module after reconnecting ...
Removal • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. • To release the fuel system pressure before removing the engine assembly, start the engine with the fuel pump relay removed. ...
Troubleshooting
Components and Components LocationOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: IMS (Integrated Memory System) module Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Engine And Transaxle Assembly Repair procedures