Kia Optima Hybrid: Emission Control System

Repair procedures

On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A).     When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Stabilizer Bar Repair procedures


Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the nut and then remove the rear stabilizer link (B) from the rear lower arm ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Temperature Control Actuator Repair procedures


Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V to the terminal 3 and grounding terminal 7. Verify that the temperature control actuator operates to the cool position ...

© 2025 Copyright www.koptimatfhev.com