Kia Optima Hybrid: Evaporative Emission Control System / NVLD(Natural Vacuum Leakage Detection) Specifications

Specification
Pressure [kPa (kgf/cm?, in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5

NVLD(Natural Vacuum Leakage Detection) Description and Operation

Description NVLD(Natural Vacuum Leakage Detection) is located between the canister and the fuel tank air filter. NVLD is to detect leaks equivalent to a 0.5 mm hole in the fuel tank, canister and hoses. ...

NVLD(Natural Vacuum Leakage Detection) Troubleshooting

Waveform ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: A/C Pressure Transducer Repair procedures


Inspection 1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficient to be regular value or not. Voltage = 0.00878835 * Pressure + 0.5[PSIA] 3. If the measured voltage value is not specification, replace ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Mode Control Actuator Repair procedures


Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the terminal 3and grounding terminal 7. 4. Verify that the mode control actuator operates to the vent mode when connecting ...

© 2022 Copyright www.koptimatfhev.com