Kia Optima Hybrid: Emission Control System / Exhaust Emission Control System
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the NVLD connector (A). 3. Disconnect the ventilation hoses (B,C). 4. Remove the NVLD after by loosening ...
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, intake manifold, ...
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between recirculation and fresh air modes. ...
Components - 1 [ General ] 1. Headrest2. Headrest guide3. Rear seat back cover4.Rear seat back frame assembly5. Rear back armrest board6. Rear seat cushion cover7. Rear back armrest8. Rear seat cushion frame assembly Components - 2 [ Seat folding ] 1. Headrest2. Headrest guide3. Rear side cover4. Rear ...
NVLD(Natural Vacuum Leakage Detection) Repair procedures
Description and OperationOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Intake Actuator Description and Operation
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear Seat Components and Components Location