Removal |
1. |
Disconnect the vapor hose (A). |
2. |
Remove the PCV valve (B). |
Inspection |
1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.
|
Installation |
1. |
Install in the reverse order of removal.
|
Operation Principle ...
Valve Clearance Inspection And Adjustment Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. 1. Remove the cylinder head cover. (Refer to Timing system in this group) 2. Set No.1 ...
Component Location(1) 1. Head lamp (Low)2. Head lamp (High)3. Turn signal lamp (and Posistion lamp)4. Position lamp (LED) and DRL5. Side marker6. Front fog lamp7. Overhead console lamp8. Room lamp9. Vanity lamp10. Turn signal lamp (O/S mirror) Component Location(2) 1. Tail lamp2. Back up lamp3. Stop/Tail ...