Kia Optima Hybrid: Automatic Transaxle System / Hydraulic System
Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions ...
Description The hydraulic system consists of oil, an oil filter, oil pump, and a valve body (valves and solenoid valves). The machanical oil pump is in the transaxle and is mechanically turned by the input ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: 13.8 ~ 15.2? [20°C(68°F)] Removal 1. Turn the ignition switch OFF and disconnect the ...
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle. ...
Automatic Transaxle Repair procedures
Description and OperationOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Injector Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Trailing Arm Repair procedures