Kia Optima Hybrid: Hydraulic System / Oil Pump Uni t(OPU) Specifications

Specifications
Operating voltage (V)
12
 Current
15 ~ 20A (normal), 45A (Max.)

Oil Pump Uni t(OPU) Description and Operation

Description The oil pump main relay is installed within the HEV fusible link box of the engine room. When the Oil Pump Unit (OPU) triggers the oil pump main relay, electric current needed to operate the ...

Oil Pump Uni t(OPU) Components and Components Location

Components Location 1. Oil Pump Unit (OPU) ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Anchor Pretensioner (APT) Description and Operation


Description Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Front seat belt anchor pretensioner ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Front Lower Arm Repair procedures


Replacement 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when removing the front wheel & tire. 2. Loosen the bolt & nut and then remove the lower arm (A). Tightening torque: ...

© 2022 Copyright www.koptimatfhev.com