Description |
...
Component Location 1. Automatic transaxle assembly 2. Machanical oil Pump assembly (MOP)3. Valve body assembly4. ATF Warmer5. Electric oil pump (EOP) ...
AHB Brake System Bleeding procedure • Do not reuse the drained fluid. • Always use genuine DOT3/DOT4 brake Fluid. Usinga non-genuine DOT3/DOT4 brake fluid can causecorrosion and decrease the life of the system. • Make sure no dirt or other foreign matter is allowed tocontaminate the ...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: 6.9 ~ 7.9? [20°C(68°F)] Removal 1. Turn the ignition switch OFF and disconnect the battery negative ...