Kia Optima Hybrid: Driveshaft and axle

Shift Cable Repair procedures

Removal     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions ...

General Safety Information and Caution

Safety Precaution     Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Electric Oil Pump (EOP) Repair procedures

Removal 1. Disconnect the 12V battery negative (-) cable. 2. Remove the under cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 3. Remove the electric oil pump (EOP) connector (A, B). 4. Remove the EOP (A) after removing the bolt and nut. Tightening torque : 42.2 ~ 53.9 ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: IMS Control Switch Repair procedures

Inspection 1. Remove the IMS control switch connector (A). 2. With the IMS control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the IMS control switch. Driver Power Seat Control Switch (For IMS) Removal 1. Disconnect ...