Kia Optima Hybrid: Restraint / SRSCM
Components 1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring4. Seat Belt Pretensioner (BPT)5. Pressure Side Impact Sensor (P-SIS)6. Side Impact Sensor (SIS)7. Side Airbag (SAB)8. Passenger Airbag ...
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the rear seat. (Refer to the BD group - "Rear seat") 3. Remove the package tray trim (A). (Refer to the BD group -"Interior trim") 4. Remove the soundproofing felt (A) to remove the wiring. 5. Remove the high mounted stop lamp after removing ...
Description The AAF (Active Air Flap) is located between radiator grille and radiator, and consists of an actuator and 6 air flaps. The system receives information from EMS, FATC, TCU, MCU and LDC via CAN communication . With this information, the AAF controls the motor properly then the air flaps adjust ...
Components and Components Location
SRS Control Module (SRSCM) Description and OperationOther information:
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: High Mounted stop lamp Repair procedures
Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Active Air Flap(AAF) Description and Operation