Projected Dimensions Front side member tooling hole (O25)Side cover mounting hole (O9)Front sub frame mounting bolt Front sub frame mounting hole(O16.5)Front side member tooling hole (O25)Front side member ...
Replacement • Be careful not to damage the fender and body. • When removing the clips, use a clip remover. 1. Remove the front bumper. (Refer to the BD group - "Front Bumper") 2. Loosen ...
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) Be careful not to damage the hub bolts when removing the rear wheel & tire. 2. Remove the rear lower arm. (Refer to lower arm) 3. Remove the rear shock absorber. (Refer ...
Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to the BD group - "Front seat") 3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat. 4. Disconnect the IMS module connector (A). Installation 1. Install the IMS module after reconnecting ...