Kia Optima Hybrid: Restraint / Seat Belt Pretensioner

Airbag Module Disposal Description and Operation

Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those installed in vehicle to be scrapped), the airbags or side airbags must be ...

Seat Belt Pretensioner (BPT) Description and Operation

Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Wheel Repair procedures


Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, final tightening torque should be checked using a torque wrench. Run out inspection 1. Jack up the vehicle. 2. Measure the wheel ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Engine Clutch Control Solenoid Valve (E/C_VFS) Repair procedures


Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A). (2) Disconnect the air intake hose (B) and then remove the air cleaner assembly (C). Tightening ...

© 2021 Copyright www.koptimatfhev.com