Description |
Never measure resistance of anchor pretensioner directly, current of measuring device may cause unexpected airbag deploy. |
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pin (A) as arrow ...
Components ...
Inspection 1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. DisplayFail description00Normal50Cluster ion generator fault * Diagnostic procedure refer to DTC code. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad. (Refer to ...
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp assembly. (Refer to the BD group - "Roof trim") 3. Check for continuity between the terminals. 4. If the continuity is not as specified, replace the panoramaroof switch (A). ...