Description |
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury. |
Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.Wiper Switch Washer Switch Removal 1. Remove the steering column upper and lower shrouds after removing 3 screws. 2. Remove the wiper switch ...
Removal Rear Combination lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). 3. Replace the turn signal lamp bulbs (A) by turning it counterclockwise. 4. Disconnect the connector (A) and then loosen the mounting nuts. 5. Remove the rear combination ...