Kia Optima Hybrid: Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Components and Components Location

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Components and Components Location

Components

Seat Belt Pretensioner (BPT) Description and Operation

Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...

Seat Belt Pretensioner (BPT) Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pin (A) as arrow ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: SRS Control Module (SRSCM) Repair procedures


Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer to the Body group - console) 4. Pull up the lock (C), of the SRSCM connector, the disconnect the connector (A and ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Thermostat Repair procedures


Removal and Installation     Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat. 1. Drain engine coolant so its level is below thermostat. 2. Disconnect the radiator lower hose ...

© 2021 Copyright www.koptimatfhev.com