Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal and the body ...
Components 1. Intake manifold assembly 2. Intake manifold gasket3. ETC (Electronic throttle body)4. Intake manifold stay ...
Component 1. Flange bolt2. Sleeve3. Reaction shaft support assembly4. Driven gear 5. Sleeve6. Driven gear 7. Oil pump housing ...
Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to the BD group - "Front seat") 3. Remove the IMS module (A) after loosening 3 screws in the bottom of seat. 4. Disconnect the IMS module connector (A). Installation 1. Install the IMS module after reconnecting ...