Kia Optima Hybrid: Automatic Transaxle Control System / SS-A Solenoid Valve (ON/OFF) Specifications

Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
Control type : Normal low type
Control pressure kpa
(kgf/cm?, psi)
490.33 (5.0, 71.12)
 Internal resistance(?)
10 ~ 11

SS-A Solenoid Valve (ON/OFF) Description and Operation

Description The SS-A solenoid valve is attached to the valve body and is an SS-A solenoid valve that is used to change gears. ...

SS-A Solenoid Valve (ON/OFF) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Brake Line Repair procedures


Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.     Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Components and Components Location


Components Location 1. ECM (Engine Control Module)2. Manifold Absolute Pressure Sensor (MAPS)3. Intake Air Temperature Sensor (IATS)4. Engine Coolant Temperature Sensor (ECTS)5. Throttle Position Sensor (TPS) [integrated into ETC Module]6. Crankshaft Position Sensor (CKPS)7. Camshaft Position Sensor ...

© 2025 Copyright www.koptimatfhev.com