Kia Optima Hybrid: Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve (UD/B_VFS) Specifications

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve (UD/B_VFS) Specifications

Specifications
Direct control VFS [UD/B]
Control type : Normal high type
Control Pressure kpa
(kgf/cm?, psi)
500.14 ~ 9.81
(5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)
50 ~ 850
 Internal resistance (?)
5.1

Underdrive Brake Control Solenoid Valve (UD/B_VFS) Description and Operation

Description Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the underdrive brake. ...

Underdrive Brake Control Solenoid Valve (UD/B_VFS) Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Mirror Repair procedures


Replacement Outside Rear View Mirror Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put on gloves to protect your hands. 1. Using a screwdriver or remover, remove the front ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Fuel Tank Pressure Sensor (FTPS) Repair procedures


Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Pressure [kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5 Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Lift ...

© 2024 Copyright www.koptimatfhev.com