Kia Optima Hybrid: Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Specifications

Specifications
Type: Negative Thermal Coefficient Type
Temp.(°C)°F
Resistance (k?)
(-40)-40
46.8
(-20)-4.0
15.6
(0)32.0
5.88
(20)68.0
2.51
(40)104.0
1.17
(60)140.0
0.59
(80)176.0
0.32
(100)212.0
0.18
(120)248.0
0.11
(140)284.0
0.07
(165)329.0
0.04

Transaxle Oil Temperature Sensor Description and Operation

Description Transaxle oil temperature sensor monitors the automatic transaxle fluid''s temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has ...

Transaxle Oil Temperature Sensor Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Repair procedures


Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.     The plunger inside ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Rear combination lamp Repair procedures


Removal Rear Combination lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). 3. Replace the turn signal lamp bulbs (A) by turning it counterclockwise. 4. Disconnect the connector (A) and then loosen the mounting nuts. 5. Remove the rear combination ...

© 2025 Copyright www.koptimatfhev.com