Kia Optima Hybrid: Automatic Transaxle Control System / Line Pressure Control Solenoid Vale Description and Operation

Description
Line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the line pressure.

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) Disconnect the breather hose ...

Line Pressure Control Solenoid Vale Specifications

Specifications Direct control VFS[LINE Pressure] Control type : Normal high type Control Pressure kpa(kgf/cm?, psi)500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value (mA)50 ~ 850 Internal resistance ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Blind Spot Detection Variant Coding Description and Operation


Description The used radar frequency of BSD is two, "North America region" and "Except North America region". If it replaces BSD unit, BSD unit has to perform the procedure of variant coding. BSD Variant Coding 1. Select the "BSD Variant Coding" procedure in BSD system. 2. Perform the "BSD Variant Coding" ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Power Door Lock Actuators Repair procedures


Inspection Front Door Lock Actuator Inspection 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. 3. Disconnect the 7P connector from the actuator. 4. Check actuator operation by connecting power and ground according to the table. To prevent damage ...

© 2022 Copyright www.koptimatfhev.com