Kia Optima Hybrid: Automatic Transaxle Control System / Line Pressure Control Solenoid Vale Specifications

Specifications
Direct control VFS[LINE Pressure]
Control type : Normal high type
Control Pressure kpa
(kgf/cm?, psi)
500.14 ~ 9.81
(5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)
50 ~ 850
 Internal resistance (?)
5.1

Line Pressure Control Solenoid Vale Description and Operation

Description Line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure to the line pressure. ...

Line Pressure Control Solenoid Vale Schematic Diagrams

Circuit Diagram ...

Other information:

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Power Seat Control Switch Repair procedures


Inspection With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. A : Power seat control switch B : Lumber support switchRemoval 1. Disconnect the negative (-) battery terminal. 2. Remove ...

Kia Optima Hybrid (TF HEV) 2016-2020 Service Manual: Air Ventilation Seat Description and Operation


Description Using the blows power of FAN on seat, remove the moisture, sweat and warmth from occupants and surface of seats. It inhales the indoor air through the blower installed at the seat cushion lower part, and supplies the air into the seat cushion and the seat back through the duct. It sends a ...

© 2022 Copyright www.koptimatfhev.com